iPhone Water Eject Sound (No Shortcut Needed)
Get water out of your iPhone speaker straight from Safari or Chrome. Works on every iPhone model.
How to use it
Three quick steps.
Open in Safari or Chrome
Turn off Silent Mode and raise the volume fully.
Hold iPhone speaker-down
The bottom speaker grille should face the floor.
Run 2 to 3 cycles
Play music between runs to check the sound.
iPhone does not have a built-in water eject
Apple Watch has a Water Lock that ejects water, but iPhone does not. Many people use a downloaded Shortcut. This page does the same thing without installing anything.
If your iPhone shows a liquid detection alert
Unplug it right away and do not charge it until the port is dry. Tap the phone gently with the port facing down and leave it in a dry, airy place. Apple advises against putting it in rice or using external heat.
Works on every model
iPhone 16, 15, 14, 13, 12, 11, XR, SE and older models all play the tone through the bottom speaker; newer models also use the top earpiece for stereo.
Questions people ask
Is it the same as the Water Eject Shortcut?
It plays a similar low tone. The difference is that you do not need to install or allow an untrusted shortcut.
Will it damage my iPhone speaker?
No. The tone is within the speaker’s normal range. Stop if you hear harsh, constant rattling.
My iPhone is water resistant. Do I still need this?
Water resistance keeps water out of the inside, but the speaker grille can still hold drops that muffle sound.
More free speaker tools
Everything you need to clean and test your audio.
Water Eject
Push water out of your phone speaker with a 165 Hz tone.
Open tool →🌪️Dust Cleaner
Sweep tones that shake dust and lint out of the grille.
Open tool →📞Ear Speaker Cleaner
Gentle tones for the small speaker you hold to your ear.
Open tool →🎛️Tone Generator
Play any frequency from 1 Hz to 20 kHz in 4 waveforms.
Open tool →🔈Left & Right Speaker Test
Check each channel and the phase of your speakers.
Open tool →🎚️Bass Test
Find the lowest frequency your speaker can play.
Open tool →👂Frequency Range Test
Sweep 20 Hz to 20 kHz to test speakers and hearing.
Open tool →🎙️Mic Test
Check your microphone level and record a sample.
Open tool →