A wet charging port is one of the most common water problems. Charging while wet can cause corrosion, so phones often block charging until the port is dry.
Safe steps
- Unplug any cable.
- Hold the phone with the port facing down and tap it gently against your palm.
- Wipe around the port with a lint-free cloth.
- Leave the phone in a dry place with airflow for at least 30 minutes.
- Try charging again. If you still see a warning, wait longer.
What not to do
- Do not blow into the port; your breath adds moisture
- Do not use a hair dryer on heat
- Do not push cotton swabs or paper inside
- Do not put the phone in rice
Can a sound remove water from the port?
Sound tools clear the speaker grille, which often sits next to the port. They do not reach inside the port itself. Air-drying is still needed.
Wireless charging while you wait
Many phones support wireless charging. If the back is dry, you can usually charge this way while the port dries.
Signs of corrosion
Green, white or brown residue inside the port, or charging that only works at certain angles, can mean corrosion. Get it cleaned by a repair shop.
FAQ
How long should I wait?
Usually 30 minutes to a few hours. In humid weather it can take up to a day.
Leave a Reply